Disco DAD321 Automatic Dicing Saw / Cutting Saw w Accessories & Spare Parts 5940
Disco DAD321 Automatic Dicing Saw / Cutting Saw w Accessories & Spare Parts 5940
Disco DAD321 Automatic Dicing Saw / Cutting Saw w Accessories & Spare Parts 5940
Disco DAD321 Automatic Dicing Saw / Cutting Saw w Accessories & Spare Parts 5940
Disco DAD321 Automatic Dicing Saw / Cutting Saw w Accessories & Spare Parts 5940
Disco DAD321 Automatic Dicing Saw / Cutting Saw w Accessories & Spare Parts 5940
Disco DAD321 Automatic Dicing Saw / Cutting Saw w Accessories & Spare Parts 5940
Disco DAD321 Automatic Dicing Saw / Cutting Saw w Accessories & Spare Parts 5940
Disco DAD321 Automatic Dicing Saw / Cutting Saw w Accessories & Spare Parts 5940
Disco DAD321 Automatic Dicing Saw / Cutting Saw w Accessories & Spare Parts 5940

Disco DAD321 Automatic Dicing Saw / Cutting Saw w Accessories & Spare Parts 5940

Regular price $ 22,100.00 Sale

 
 
Disco DAD321 Automatic Dicing Saw / Cutting Saw w Accessories & Spare Parts 
(5940)
Powers up, shows no errors, responds to keys, was removed in working condition, overall great cosmetic condition, interior is immaculate in condition, 
&
large amount of new and used accessories.



  • Manufacturer: Disco 
  • Model #: DAD321
  • Model: Automatic Dicing Saw
  • Description: The DAD321 dices a workpiece with a diameter up to 6" using a high output air spindle with a diamond blade attached, after manual chucking and alignment.  
  • Specifications: 
  • Software Ver: 5.40
  • Manufacturer #: HE2842
  • Machine ID: DICER-806
  • Cutting Section
  1. ​X-Axis 
    1. ​Slide and Drive System 
      1. ​Motor - AC Servomotor 
      2. Transfer mechanism: Ball Screw
      3. Guide - Linear Guide
    2. ​​Maximum Stroke - 248 mm
    3. Cutting Range  - 192mm 
      1. (96 mm to the left and 96mm to the right of the spindle center)
    4. ​​Workpiece Width Setting Range - 0" to 6" (0-160mm) Step 0.001mm
    5. Operating Speed
      1. Transfer Speed Input Range - 0.1 to 300 mm/s 
      2. Return Speed - 300 mm/s
    6. ​​Control System - Closed-loop system using AC servo motor
  2. ​Y-Axis
    1. ​Slide and Drive System
      1. ​Motor - Pulse Motor
      2. Transfer Mechanism - Ball Screw
      3. Guide - Linear Guide
    2. ​​Maximum Stroke - 162 mm
    3. Cutting Range - 162 mm 
      1. ​(81mm to the front & 81mm to the rear from the table center)
    4. ​​Workpiece Width Setting Range- 0" to 6" (0-160mm) Step 0.0002
    5. Index Setting Range
      1. ​Input - 0.0002 to 160mm (Step 0.0002 mm)
      2. Speed - 60 mm/s
    6. ​​Control System- Open-loop system
  3. ​Z-axis
    1. Slide and Drive System
      1. Motor - Pulse Motor
      2. Transfer Mechanism - Ball Screw
      3. Guide - Linear Guide
    2. Maximum Stroke
      1. 32 mm 
      2. Limit for the moving from the chuck table upper surface to the spindle center
      3.  Upper Limit: 56 mm
      4. Lower Limit: 24mm
    3. ​​Amount Left Uncut - 0.0001 to 32mm (Step - 0.0001 mm)
    4. Moving Resolution - 0.0001
  4. ​ 0-Axis 
    1. ​Drive System 
      1. ​Motor - Direct Drive Motor
      2. Transfer Mechanism: Direct Drive 
    2. ​​Maximum Rotating Angle: 380 Degrees 
      1. ​100 Degrees for CW and 280 Degrees for CCW from the initial position
    3. Control System: Closed Loop system using a direct drive motor
    4. Motor Resolution: 1.0" (angle)
  5. ​​Microscope Section
    1. ​Microscope - Dual Objective lens microscope
    2. Span - 40mm 
    3. Magnification 
      1. ​Objective - 5x 
      2. Total - 195x (on the CRT screen)
    4. ​​Visible Range
      1. ​18mm from the upper surface of the standard chuck table
      2. From the table center - 57mm for Left (all for right direction)
      3. Front: 81mm 
      4. Rear: 81mm
  6. ​ Operation Section
    1. ​Console Display
      1. ​A 9-Inch CRT is employed to display microscope images, cutting data, error messages, and other relevant information
    2. Guidance language to be displayed on the CRT
      1. ​Japanaese, English, or Chinese​​
    3. ​​Keyboard
      1. ​Keyboard is comprised of function keys, ten key pad, cursor keys, single function keys, and axis movment operation keys.
  7. ​Accuracy
    1. ​Chuck Table upper surface parallelism (when measuring at 22 C)
    2. Y-axis indexing accuracy
      1. ​Single error :0.003 mm or less 
      2. Cumulative error : 0.005 mm/160mm or less 
    3. ​​Z-axis repeatability
      1. ​0.001 mm (range)
  8. ​Power Requirements 
    1. ​Voltage - 200VAC +- 10%, 3 phase 
    2. Frequency - 50 to 60 Hz
    3. Noise - Less than 2000V at a pulse width of 500ns (square wave)
    4. Grounding - A ground connection must be made. Grounding must be carried out according to your local regualtions.
    5. Power Consumption
      1. ​During Processing - 0.6 kW
      2. During Warming up - 0.5 kW
    6. ​​Maximum Power - 3.5 kVA
  9. ​Air Supply Source
    1. ​Supplied Pressure 
      1. ​Range :  0.5 to 0.6 MPa (5.0 to 6.0 kgf/cm Squared)
      2. Fluctuation Range : -+ MPa (-+0.1kgf/cm squared)
    2. ​​Nominal Filtration Rating: 0.00001 mm/99.5% or more
    3. Residual Oil : 0.1 ppm
    4. Atmospheric Dew Point : -15C or less
    5. Connection Port : Rc (PT) 1/4 Female
    6. Maximum Consumption: 162L/min (ANR) (150 NL/min) (except for the use of air gun)
  10. ​Water Used
  • Wheel Coolant Water ​Spindle Coolant Water
    1. ​Pressure 0.3 MPa (3.0 kgf/cm squared)
    2. Water Temp: Room Temperature + 2C (Fluctuation Range +-1C)
    3. Water Quality: Consult DISCO sales rep when using other than DEIONIZED Water
    4. Connection Port: Rc (PT) 1/4 female
    5. Flow Rate Setting Range:0.2 to 0.4 L/min (maximum flow rate fluctuates depending on the wheel cover to be used.)
    6. ​Pressure: 0.3 MPa (3.0 kgf/cm squared) Fluctuation range -+ 0.02 MPa                  (-+0.2kgf/cm squared)
    7. Water Temp: Same as room temp, fluctuation range within +-1 Degree C
    8. Water Quality: High content of chloride (Cl), Iron (Fe), Copper (Cu), and Sodium (Na) or high ratio of conductivity may cause corrosion of the machanical parts or clogging of piping.
    9. Connection Port: Rc (PT) 1/4 Female
    10. Consumption Flow Rate: 1.5L/min
  1. ​Water Drainage 
    1. ​1 connection port: Duct hose I.D. 32mm
  2. ​Duct
    1. ​Capacity: 1.5m cubed/min or larger          (if the capacity is smaller, contact DISCO rep)
    2. Connection Port: Duct hose I.D. 32mm
  3. ​Main Dimensions 
    1. ​Main Body:  (mm) W 500 (20") x D 1050 (42")x H 1455 (58") (without protrusions) 
  4. ​Machine Dry Mass: Approx. 500kg (1100 lbs)
  5. ​Acessories
    1.  Comes with operation, data maintenance,​ technical reference, installation, maintenance, standard operating procedures, and instruction of use manuals. 
    2. Comes with all approprite tools for removing and putting in the blades and Flange
    3. Water Solution 
    4. Four new rolls of NEW UC Tape 
      1. ​Type: UC-120M-120
      2. Size: 120µm x 230mm x 100m (each)
      3. Expire: 2015 /07/07 (but has never been opened)
    5. ​​Various Sized Chucks 
    6. Large amount of Diamond Blades
    7. Torque wrenches 
    8. Removing set for hubs
    9. There are too many Blades, Flanges, etc.. to list specifically. (see images for full accessories description)
    10. Various Chucks (see images) 
    11. Backup Keyboard
    12.  1 Backup Computer Boards FBPCB-0076R5 (Motor Control Board) MAC998FA
    13. Extra microscope eyepiece and eyepiece attachments
    14. Multiple other parts (see images)


Crated For Shipping: Crating Fee $200.00 



Sold as is with 30 day Right of Return, only pictured items included
 
Easy return/refund for any reason

Anacapa Equipment
    
RETURNS
Anacapa Equipment strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items must be received in the same condition as sent.  We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID.  
 
SHIPPING     
All equipment purchased is shipped within one (1) day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID.  
 
LIMITED WARRANTY
Buyer acknowledges that the equipment is being sold “as is” and without any warranty of merchantability or fitness for a particular use.  Buyer may inspect the equipment prior to purchase and placement of the order prior to inspection is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of this product for its application.  Anacapa Equipment Brokers, Inc. assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.  The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty.
 
 
 
 








Images sell!
Get Supersized Images & Free Image Hosting


Attention Sellers - Get Templates
Image Hosting, Scheduling at Auctiva.com.