LMG 20 TON Advantage Hydraulic Press Trink's Inc Mold Heated Platens (10510)

LMG 20 TON Advantage Hydraulic Press Trink's Inc Mold Heated Platens (10510)

$15,000 (USD)

or Best Offer

Location:Goleta, CA

orCall (805)-6364334

Description

 
 
Trink's LMG 20 Ton Advantage Mold Press Hydraulic w/ Heated Platens (10510)

 

​Used, out of working environment, unable to test.  Requires hydraulic pump (NOT INCLUDED) to operate.  Display in good condition, press in very good cosmetic condition.  Sold AS IS returns accepted, may be inspected.

  • Manufacturer:  Trink's Inc. LMG  Bosch Rexroth
  • Model: 20 Ton Mold Advantage Hydraulic Press
  • Includes User Manual and Wiring Diagram on Flash Drive
  • Includes:
    • Bosch Rexroth R978056286
    • 208/230 V
    • Safety Cabinet
    • Heated Platens
  • The following is taken from the manufacturer's manual for this press and may not fully pertain to this item, included for reference, please look at pictures to verify:

 

The Advantage Press supplies the long - awaited answer to the molding industries for a versatile, reliable, press that can simply and quickl y be programmed .

Adjustable High Speed - Transfer and clamp cylinder advance and retract high speeds are user programmable for optimum cycle time.

Adjustable Mold Ejection Speed (Optional ) - Mold ejection speed and reset position are user programmable for controlled mold ejection.

Energy Saving Hydraulic Circuit - Tube/fin oil - to - water heat exchanger to maximize oil contact for optimum efficiency and temperature proportioning water control valve for acc urate regulation result in significant savings in utility sourced water.

Extra Thick Platen - Extra heavy upper platen design to minimize platen deflection.

Hydraulic Oil Over Temperature Protection - Press fault alarm will appear on screen, cycle in progress will continue and shut down when clamp opens.

Menu Driven Operator Interface - Programming of all press functions and parameters are done via a menu interface and integr al touch screen. All screens have “help” facilities explaining the parameter to be entered and its allowable range.

Mold Over Temperature Cut - off (Optional ) - Mold heat shut down when this setting is reached.

Mold Protection - Low pressure clamp closing with .001” resolution. Will detect misaligned and double strips. Programmable mold protect force setting for extra clamp tonnage (max 9.99 tons) to overcome springs, friction, etc...

Press Fault Ind icators - Press faults are displayed onscreen as fault messages.

Manifold Mounted Valves – Manifold mounted valv es for minimum pipe shock and vibration, with plug - in connectors, circuit test ports, and solenoid indicating lights for ease in trouble shooting.

Transfer Cylinder Control System - Transfer cycle fully prog rammable for velocity and/or pressure profile steps. Double closed loop electronics provide positive self - compensating velocity and pressure control. manual 202730

Transfer Ram Follow Through - Transfer ram can be programmed to advance upon opening of molds to aid in cull removal

Clamp
Clamp Tonnage  20 ton (18 tons-metric)
Clamp Stroke, 7 In. (177.8 mm)
Daylight, Platen Open, 13.5 In. (342.9 mm)
Die Space: L-R between Tie Rods, 5 In. (381 mm)
Front to back overall 15 In. (381 mm)
Platen, Working height, 34.5 In. (876.3 mm)
Clamp, Fast Close, IPM 145 (61.38 mm/s)
Clamp, Slow Close, IPM 2-20 (0.84-8.47 mm/s)
Clamp, Fast Open, IPM 195 (82.55 mm/s)
Transfer Tonnage (U.S. tons)  0.7 Ton (0.64 tons-metric)
Transfer Stroke,  4 In. (101.6 mm)
Electrical
Motor Power Supply 400 / 3 / 50
Motor Horse Power  7.5 hp
Heater Outlets per Platen  6 (Integrated)
Maximum KW per Platen 7.5kw
Maximum Heater Wattage per outlet  1500
Dimensions
Overall Height  71 Inches (1803.4 mm)
Floor Space, L-R, F-B 54 x 42 Inches (1371.6 x 1066.8 mm)
Weight 3,000 Lbs (1360.77 kg)

Hydraulic Pump Specifications. NOT INCLUDED
Variable displacement 8.3 GPM (31.42 lpm)
Oil capacity, gallons 20 GAL (75.71 L)
 

  • Does NOT include pump
  • 2400# 60 x 56 x 90 Crated
  • Please ask for freight and crating quote

TO RECEIVE REFUND FOR SHIPPING CLAIM:
DAMAGE TO SHIPMENT MUST BE NOTED ON BOL (FREIGHT) WITH PHOTO OF DAMAGE NOTE
PHOTOS OF DAMAGE OF ITEM AND BOX/CRATE MUST BE TAKEN
KEEP ALL PACKAGING

Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
(IF DAMAGED DUE TO FREIGHT CARRIER HANDLING YOU MUST FOLLOW STEPS ABOVE TO RECEIVE REFUND) 

Anacapa Equipment

RETURNS 
Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent.  We DO NOT ship internationally.  If you are using a freight forwarder then returns are VOID.  
SHIPPING                                                                                                               All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID.  
LIMITED WARRANTY                                                                 
Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use.  The entire risk as to the quality and performance of the equipment is with the Buyer.  Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair.  Buyer may inspect the equipment prior to purchase and placement of the order.  Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of the equipment for its application.  Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.  The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty.
INDEMNITY                                                                                                            
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller.  The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws.  Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California. 

 

 
 













 
 
Trink's LMG 20 Ton Advantage Mold Press Hydraulic w/ Heated Platens (10510)

 

​Used, out of working environment, unable to test.  Requires hydraulic pump (NOT INCLUDED) to operate.  Display in good condition, press in very good cosmetic condition.  Sold AS IS returns accepted, may be inspected.

  • Manufacturer:  Trink's Inc. LMG  Bosch Rexroth
  • Model: 20 Ton Mold Advantage Hydraulic Press
  • Includes User Manual and Wiring Diagram on Flash Drive
  • Includes:
    • Bosch Rexroth R978056286
    • 208/230 V
    • Safety Cabinet
    • Heated Platens
  • The following is taken from the manufacturer's manual for this press and may not fully pertain to this item, included for reference, please look at pictures to verify:

 

The Advantage Press supplies the long - awaited answer to the molding industries for a versatile, reliable, press that can simply and quickl y be programmed .

Adjustable High Speed - Transfer and clamp cylinder advance and retract high speeds are user programmable for optimum cycle time.

Adjustable Mold Ejection Speed (Optional ) - Mold ejection speed and reset position are user programmable for controlled mold ejection.

Energy Saving Hydraulic Circuit - Tube/fin oil - to - water heat exchanger to maximize oil contact for optimum efficiency and temperature proportioning water control valve for acc urate regulation result in significant savings in utility sourced water.

Extra Thick Platen - Extra heavy upper platen design to minimize platen deflection.

Hydraulic Oil Over Temperature Protection - Press fault alarm will appear on screen, cycle in progress will continue and shut down when clamp opens.

Menu Driven Operator Interface - Programming of all press functions and parameters are done via a menu interface and integr al touch screen. All screens have “help” facilities explaining the parameter to be entered and its allowable range.

Mold Over Temperature Cut - off (Optional ) - Mold heat shut down when this setting is reached.

Mold Protection - Low pressure clamp closing with .001” resolution. Will detect misaligned and double strips. Programmable mold protect force setting for extra clamp tonnage (max 9.99 tons) to overcome springs, friction, etc...

Press Fault Ind icators - Press faults are displayed onscreen as fault messages.

Manifold Mounted Valves – Manifold mounted valv es for minimum pipe shock and vibration, with plug - in connectors, circuit test ports, and solenoid indicating lights for ease in trouble shooting.

Transfer Cylinder Control System - Transfer cycle fully prog rammable for velocity and/or pressure profile steps. Double closed loop electronics provide positive self - compensating velocity and pressure control. manual 202730

Transfer Ram Follow Through - Transfer ram can be programmed to advance upon opening of molds to aid in cull removal

Clamp
Clamp Tonnage  20 ton (18 tons-metric)
Clamp Stroke, 7 In. (177.8 mm)
Daylight, Platen Open, 13.5 In. (342.9 mm)
Die Space: L-R between Tie Rods, 5 In. (381 mm)
Front to back overall 15 In. (381 mm)
Platen, Working height, 34.5 In. (876.3 mm)
Clamp, Fast Close, IPM 145 (61.38 mm/s)
Clamp, Slow Close, IPM 2-20 (0.84-8.47 mm/s)
Clamp, Fast Open, IPM 195 (82.55 mm/s)
Transfer Tonnage (U.S. tons)  0.7 Ton (0.64 tons-metric)
Transfer Stroke,  4 In. (101.6 mm)
Electrical
Motor Power Supply 400 / 3 / 50
Motor Horse Power  7.5 hp
Heater Outlets per Platen  6 (Integrated)
Maximum KW per Platen 7.5kw
Maximum Heater Wattage per outlet  1500
Dimensions
Overall Height  71 Inches (1803.4 mm)
Floor Space, L-R, F-B 54 x 42 Inches (1371.6 x 1066.8 mm)
Weight 3,000 Lbs (1360.77 kg)

Hydraulic Pump Specifications. NOT INCLUDED
Variable displacement 8.3 GPM (31.42 lpm)
Oil capacity, gallons 20 GAL (75.71 L)
 

  • Does NOT include pump
  • 2400# 60 x 56 x 90 Crated
  • Please ask for freight and crating quote

TO RECEIVE REFUND FOR SHIPPING CLAIM:
DAMAGE TO SHIPMENT MUST BE NOTED ON BOL (FREIGHT) WITH PHOTO OF DAMAGE NOTE
PHOTOS OF DAMAGE OF ITEM AND BOX/CRATE MUST BE TAKEN
KEEP ALL PACKAGING

Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
(IF DAMAGED DUE TO FREIGHT CARRIER HANDLING YOU MUST FOLLOW STEPS ABOVE TO RECEIVE REFUND) 

Anacapa Equipment

RETURNS 
Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent.  We DO NOT ship internationally.  If you are using a freight forwarder then returns are VOID.  
SHIPPING                                                                                                               All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID.  
LIMITED WARRANTY                                                                 
Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use.  The entire risk as to the quality and performance of the equipment is with the Buyer.  Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair.  Buyer may inspect the equipment prior to purchase and placement of the order.  Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of the equipment for its application.  Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.  The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty.
INDEMNITY                                                                                                            
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller.  The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws.  Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California. 

 

 
 

Specifications

ManufacturerTrinks Inc LMG
Model20 Ton
ConditionUsed
Stock Number10510