Xenon RC-847 UV/VIS Pulsed Light Curing System, RC-800, RC-847, LH-840 (6939)

Xenon RC-847 UV/VIS Pulsed Light Curing System, RC-800, RC-847, LH-840 (6939)

$9,000 (USD)

or Best Offer

Location:Goleta, CA

orCall (805)-6364334

Description

 
 
Xenon RC-847 UV/VIS Pulsed Light Curing System, RC-800, RC-847, LH-840 + Extras (6939)R

In great cosmetic condition. Powers on, display and switches respond well to input. Light inside the housing turns on. No seals on the door are present, and must be replaced. Danger from UV and Ozone Exposure. Only properly trained personal should operate. The Red Vice Clamp in the pictures is NOT included. See pictures for more detail. 

 

  • Manufacturer: Xenon
  • Model: Pulsed Light Curing System

Xenon S-1000 Benchtop Sintering System

  • Specifications:
  • User Controls
  • Mains voltage ON/OFF]
  • High voltage ON/OFF
  • Manual flash trigger mode OFF/CONT/BURST
  • Continuous flash trigger mode START/STOP
  • Lamp operating voltage
    • Spiral Lamp: 2.85 KV - 3.80 KV
    • Linear Lamp: 2.25 KV - 3.80 KV
  • Programmable timer 1-999 seconds in 1 second interval
  • Pulsed Light Power output to flash lamp 2300 Joules/second, max
  • Pulse rate 1.8 pulses/second max, factory set
  • Pulse duration 520 μs
  • Dose: Spiral Lamp: 4.0 J/cm2 Linear Lamp: 4.9 J/cm2
  • Pulse energy safe operating range Spiral Lamp: 465-830 Joules/pulse Linear Lamp: 290-830 Joules/pulse
  • Controller Cooling Internal fan, continuous ON
  • Power Input 40.64 cm x 274.3 cm (16” x 108”)
  • Controller 1-phase 200-240 Vrms 50/60 Hz 30 amps max
  • Mains power cord 2.4 meters (8 feet)
  • Controller Outline Dimensions (HxWxL) 226 x 480 x 706 mm (8.8” x 18.9” x 27.8”)
  • Controller Weight 39 kg (87 pounds)
  • Includes: RC-800 Module

Xenon UV Lamp Housing W/ Steri Chamber

  • Model: LH-840
  • Linear Lamp Housing The LH-840 linear lamp housing provides a curing area of 1.9 x 30.5 cm (0.75” x 12”). The flash lamp is mounted inside the housing with provisions for external air cooling.
  • Steri Chamber Part Number: 860-0105
  • Access Door Hinged; 18" x 6" (457.2 x 152.4 mm)
  • Material Metal grade stainless steel with clear passivate overcoat
  • Disinfecting Methods Note 4 Door Interlock High
  • Voltage disabled at controller when chamber door open
  • Chamber interlock cable 2-foot (0.6 meters)
  • Mains Power Cord 7-foot (2.1 meters)
  • Outline Dimensions 11.61" x 30.5" x 16.0" (294.9 x 774.7 x 406.4 mm) (H x W x D)
  • Voltage (internal fan)
  • Weight 200-240 Vrms (±10%), (50/60 Hz), single phase, 3 amperes 57 pounds (25.9 kg)
  • Includes: Extra UV Bulb (See pictures for more detail)

Blower Kit w/ Dayton Industrial Motor

  • Specifications:
    • ​Model: 6K197BB
    • Hp: 1 Hz: 60
    • V115/208-230 PH: 1
    • RPM: 3450 Code: K 
    • Amps: 11.8/6.3-5.9 SF: 1
    • Includes: Aluminum Ducting (See pictures for more detail.)

International Light Radiometer

  • Model ILT1700
  • Measurement Range: 0.2 picoAmps to 200 milliAmps (Optical units will depend on sensor selection).
  • Minimum display resolution is 0.01x10-11 Amps.
  • Linearity: ±0.1%, ±1 digit on the top 8 decades of measurement range and ±0.2%, ±1 digit on the bottom 2 decades
  • Refresh Rate: 2 readings/second (options for 4 or 8 readings/second available)
  • Power: 90-130/180-240 VAC, 50-60 Hz, 8-15 VDC external or 6 internal "C" cell NiCad rechargeable batteries
  • Size: 5.3 inches x 8.7 inches x 9.4 inches (90 mm x 220 mm x 240 mm)
  • Weight: 5.1 pounds (2.3 kg)
  • Includes: Instruction Manual, ILT1700-USB (Instrument Driver), Power Cord, SED033 W#13693, SED240 W#13737 Sensors.

Crating Fee: $400



 Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment

RETURNS 
Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent.  We DO NOT ship internationally.  If you are using a freight forwarder then returns are VOID.  
SHIPPING                                                                                                               All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID.  
LIMITED WARRANTY                                                                 
Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use.  The entire risk as to the quality and performance of the equipment is with the Buyer.  Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair.  Buyer may inspect the equipment prior to purchase and placement of the order.  Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of the equipment for its application.  Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.  The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty.
INDEMNITY                                                                                                            
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller.  The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws.  Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California. 

 

  
 









 
 
Xenon RC-847 UV/VIS Pulsed Light Curing System, RC-800, RC-847, LH-840 + Extras (6939)R

In great cosmetic condition. Powers on, display and switches respond well to input. Light inside the housing turns on. No seals on the door are present, and must be replaced. Danger from UV and Ozone Exposure. Only properly trained personal should operate. The Red Vice Clamp in the pictures is NOT included. See pictures for more detail. 

 

  • Manufacturer: Xenon
  • Model: Pulsed Light Curing System

Xenon S-1000 Benchtop Sintering System

  • Specifications:
  • User Controls
  • Mains voltage ON/OFF]
  • High voltage ON/OFF
  • Manual flash trigger mode OFF/CONT/BURST
  • Continuous flash trigger mode START/STOP
  • Lamp operating voltage
    • Spiral Lamp: 2.85 KV - 3.80 KV
    • Linear Lamp: 2.25 KV - 3.80 KV
  • Programmable timer 1-999 seconds in 1 second interval
  • Pulsed Light Power output to flash lamp 2300 Joules/second, max
  • Pulse rate 1.8 pulses/second max, factory set
  • Pulse duration 520 μs
  • Dose: Spiral Lamp: 4.0 J/cm2 Linear Lamp: 4.9 J/cm2
  • Pulse energy safe operating range Spiral Lamp: 465-830 Joules/pulse Linear Lamp: 290-830 Joules/pulse
  • Controller Cooling Internal fan, continuous ON
  • Power Input 40.64 cm x 274.3 cm (16” x 108”)
  • Controller 1-phase 200-240 Vrms 50/60 Hz 30 amps max
  • Mains power cord 2.4 meters (8 feet)
  • Controller Outline Dimensions (HxWxL) 226 x 480 x 706 mm (8.8” x 18.9” x 27.8”)
  • Controller Weight 39 kg (87 pounds)
  • Includes: RC-800 Module

Xenon UV Lamp Housing W/ Steri Chamber

  • Model: LH-840
  • Linear Lamp Housing The LH-840 linear lamp housing provides a curing area of 1.9 x 30.5 cm (0.75” x 12”). The flash lamp is mounted inside the housing with provisions for external air cooling.
  • Steri Chamber Part Number: 860-0105
  • Access Door Hinged; 18" x 6" (457.2 x 152.4 mm)
  • Material Metal grade stainless steel with clear passivate overcoat
  • Disinfecting Methods Note 4 Door Interlock High
  • Voltage disabled at controller when chamber door open
  • Chamber interlock cable 2-foot (0.6 meters)
  • Mains Power Cord 7-foot (2.1 meters)
  • Outline Dimensions 11.61" x 30.5" x 16.0" (294.9 x 774.7 x 406.4 mm) (H x W x D)
  • Voltage (internal fan)
  • Weight 200-240 Vrms (±10%), (50/60 Hz), single phase, 3 amperes 57 pounds (25.9 kg)
  • Includes: Extra UV Bulb (See pictures for more detail)

Blower Kit w/ Dayton Industrial Motor

  • Specifications:
    • ​Model: 6K197BB
    • Hp: 1 Hz: 60
    • V115/208-230 PH: 1
    • RPM: 3450 Code: K 
    • Amps: 11.8/6.3-5.9 SF: 1
    • Includes: Aluminum Ducting (See pictures for more detail.)

International Light Radiometer

  • Model ILT1700
  • Measurement Range: 0.2 picoAmps to 200 milliAmps (Optical units will depend on sensor selection).
  • Minimum display resolution is 0.01x10-11 Amps.
  • Linearity: ±0.1%, ±1 digit on the top 8 decades of measurement range and ±0.2%, ±1 digit on the bottom 2 decades
  • Refresh Rate: 2 readings/second (options for 4 or 8 readings/second available)
  • Power: 90-130/180-240 VAC, 50-60 Hz, 8-15 VDC external or 6 internal "C" cell NiCad rechargeable batteries
  • Size: 5.3 inches x 8.7 inches x 9.4 inches (90 mm x 220 mm x 240 mm)
  • Weight: 5.1 pounds (2.3 kg)
  • Includes: Instruction Manual, ILT1700-USB (Instrument Driver), Power Cord, SED033 W#13693, SED240 W#13737 Sensors.

Crating Fee: $400



 Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment

RETURNS 
Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent.  We DO NOT ship internationally.  If you are using a freight forwarder then returns are VOID.  
SHIPPING                                                                                                               All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID.  
LIMITED WARRANTY                                                                 
Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use.  The entire risk as to the quality and performance of the equipment is with the Buyer.  Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair.  Buyer may inspect the equipment prior to purchase and placement of the order.  Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of the equipment for its application.  Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.  The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty.
INDEMNITY                                                                                                            
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller.  The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws.  Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California. 

 

  
 
Show All

Specifications

ManufacturerXenon
ModelRC-800 RC-847 LH-840 S-1000
ConditionUsed
Stock Number6939