Waters 2695 Separations Module HPLC w/ 2475 Multi λ Fluorescence Detector (7255)

• Manufacturer: Waters
• Model #/ Model: 2695 | 2475 SM4 289000560 186002475 186001791

Includes:

• 2695 Separations Module WAT270008
• Syringe Assembly Model: SM4 (Syringe is NOT included)
• SCH Sampler Heater/Cooler Unit: 289000560
• 2475 Multi λ Fluorescence Detector 186002475
• Column Heater/Cooler Model: 186001791

2695 Separations Module

• Number of solvents: One to four
• Solvent conditioning: Vacuum degas, two (2) operating modes, four (4) chambers, ≈<500 uL internal volume per chamber> <500uL interval volume per chamber
• Programmable flow rate range: 0.000 and 0.010 to 10.000 mL/min in 0.001-mL/min. increments
• Typical operating flow rate range: 0.050 to 5.000 mL/min in 0.001-mL/min increments
• Compressibility compensation: Automatic and continuous
• Effective system delay volume: <650 µL, independent of backpressure @ 1 mL/min
• Plunger seal wash: Integra, active, programmable
• Gradient profiles: Eleven (11) gradient curves [including linear, step (2 curves), concave (4 curves), and convex (4 curves)]
• Dry prime/wet prime: Automatic, front panel control
• Flow ramping: Time (0.01 to 30.00 min in 0.01-min increments) to reach maximum flow rate
• Maximum operating pressure: 5000 psi (345 bar) (0.010 to 3.000 mL/min) Programmable upper and lower limits. Pressure fall-off at >3.000 mL/min.
• Pressure ripple: ≤2.5% (1 mL/min, degassed methanol, at 1700 psi backpressure)
• Composition accuracy: ±0.5% absolute, independent of backpressure (Proportioning Valve Pair Test [degassed methanol:methanol/propylparaben, 2 mL/min, 254 nm])
• Composition precision: ≤0.15% RSD or ≤0.02 min SD, whichever is greater, based on retention time. (Degassed methanol:water 60:40 Dial-a-Mix, 1 mL/min, six replicates, phenone mix, 254 nm.)
• Flow precision: ≤0.075% RSD or ≤0.02 min SD, based on retention time (N = 6) or volumetric measures (0.200 to 5.000 mL/min), isocratic premix
• Flow accuracy: ±1% or 10 µL/min, whichever is greater, (0.200 to 5.000 mL/ min), degassed methanol, at 600 psi backpressure

2475 Multi λ Fluorescence Detector

• Wavelength repeatabilty: + 0.25nm
  Sensitivity, single channel:
  • Ex: 350 nm
  • Em: 397 nm
• Sensitivity Setting Range: 1 to 100,000 EUFS
• Filter Setting Range:
• Single Channel:
  • 0.1 to 5.0 seconds Hamming (default)
  • 0.1 to 99 seconds, RC
• Multichannel:
  • 1 to 50 seconds, Hamming (default)
  • 1 to 99 seconds, RC
• Cell Volume: 8uL

Shipping:

• Actual Weight:~190 #
• Shipping Weight: 240#
• Actual Dimensions: (LxWxH): 24x26x32"
• Shipping Dimensions: 36 X 32 X 38 "WDH 240#

Crating Fee: Ask For Quote
Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment

RETURNS 
Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent.  We DO NOT ship internationally.  If you are using a freight forwarder then returns are VOID.  
SHIPPING                                                                                                               All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID.  
LIMITED WARRANTY                                                                 
Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use.  The entire risk as to the quality and performance of the equipment is with the Buyer.  Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair.  Buyer may inspect the equipment prior to purchase and placement of the order.  Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of the equipment for its application.  Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.  The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty.
INDEMNITY                                                                                                            
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller.  The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws.  Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.