| |
|
Zaber Tech T-LSM150B Motorized Linear Stage (10562)
|
Used, in good cosmetic condition, unable to test.
- Manufacturer: Zaber Tech
- Model: T-LSM150B
-
The following is taken from the manufacturer's website and may not be specific to this listing, provided for reference:
-
Specification
Value
Alternate Unit
| Microstep Size (Default Resolution) |
0.1905 µm
|
|
| Built-in Controller |
Yes
|
|
| Travel Range |
152.4 mm
|
6.000"
|
| Accuracy (unidirectional) |
65 µm
|
0.002559"
|
| Repeatability |
< 6 µm
|
< 0.000236"
|
| Backlash |
< 16 µm
|
< 0.000630"
|
| Maximum Speed |
29 mm/s
|
1.142"/s
|
| Minimum Speed |
0.001786 mm/s
|
0.000070"/s
|
| Speed Resolution |
0.001786 mm/s
|
0.000070"/s
|
| Encoder Type |
None
|
|
| Peak Thrust |
21 N
|
4.7 lb
|
| Maximum Continuous Thrust |
21 N
|
4.7 lb
|
| Communication Interface |
RS-232
|
|
| Communication Protocol |
Zaber Binary
|
|
| Data Cable Connection |
Minidin 6 pin M/F
|
|
| Maximum Centered Load |
100 N
|
22.4 lb
|
| Maximum Cantilever Load |
300 N⋅cm
|
424.8 oz⋅in
|
| Guide Type |
Needle roller bearing
|
|
| Vertical Runout |
< 8 µm
|
< 0.000315"
|
| Horizontal Runout |
< 12 µm
|
< 0.000472"
|
| Pitch |
0.04°
|
0.698 mrad
|
| Roll |
0.02°
|
0.349 mrad
|
| Yaw |
0.03°
|
0.523 mrad
|
| Power Supply |
12-16 VDC
|
|
| Power Plug |
2.1 mm center positive
|
|
| Maximum Current Draw |
500 mA
|
|
| Linear Motion Per Motor Rev |
2.4384 mm
|
0.096"
|
| Motor Steps Per Rev |
200
|
|
| Motor Type |
Stepper (2 phase)
|
|
| Inductance |
1.5 mH/phase
|
|
| Default Resolution |
1/64 of a step
|
|
| Mechanical Drive System |
Precision lead screw
|
|
| Limit or Home Sensing |
Magnetic hall sensor
|
|
| Manual Control |
Yes
|
|
| Axes of Motion |
1
|
|
| LED Indicators |
Yes, Bi-Colour
|
|
| Mounting Interface |
M3 and M6 threaded holes and M4 threaded center hole
|
|
| Stage Parallelism |
< 25 µm
|
< 0.000984"
|
| Operating Temperature Range |
0 to 50 °C
|
|
| RoHS Compliant |
Yes
|
|
| CE Compliant |
Yes
|
|
| Vacuum Compatible |
No
|
|
| Weight |
0.39 kg
|
0.860 lb
|
Specification Charts and Notes - T-LSM Series
Thrust or torque is a function of speed. The values given above are maximums. These values cannot both be achieved simultaneously (i.e. at maximum speed, the unit will not produce maximum thrust).
TO RECEIVE REFUND FOR SHIPPING CLAIM:
DAMAGE TO SHIPMENT MUST BE NOTED ON BOL (FREIGHT) WITH PHOTO OF DAMAGE NOTE
PHOTOS OF DAMAGE OF ITEM AND BOX/CRATE MUST BE TAKEN
KEEP ALL PACKAGING
Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
(IF DAMAGED DUE TO FREIGHT CARRIER HANDLING YOU MUST FOLLOW STEPS ABOVE TO RECEIVE REFUND)
Anacapa Equipment
RETURNS
Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID.
SHIPPING All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID.
LIMITED WARRANTY
Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased. The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty.
INDEMNITY
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.
|
|
