FFFractionation Field Flow PostNova Split Flow Thin Cell FISI-1000 Splitt (10411

FFFractionation Field Flow PostNova Split Flow Thin Cell FISI-1000 Splitt (10411

$275 (USD)

or Best Offer

Location:Goleta, CA

orCall (805)-6364334

Description

 
 
FFFractionation PostNova Split Flow Thin Cell FISI-1000 Splitt (10411)

 

  • Manufacturer:  PostNova FFFractionation
  • Model: FISI-1000
  • Dimensions: 14.25 x 4 x 4.25" WDH
  • The following is taken from the manufacturer's website and we believe it pertains to this item.  It is included for reference only:
  • Split Flow Thin Cell (Splitt) Principle

     

    Microparticle Preparation

    Split Flow Thin Cell Fractionation (SPLITT) is a special preparative Field-Flow Fractionation technique, using earth gravity for separation of µm-sized particles on a continuous basis. Split Flow Thin Cell Fractionation (SPLITT) was invented and first published by Prof. Giddings in 1985. There are different ways of performing SPLITT; in the most common way, the sample containing liquid is pumped into the top inlet a’ at the beginning of the channel and a carrier liquid is at the same time pumped into the bottom inlet b’. By controlling the flow rate ratios of the two inlet streams and the flow rates of the two outlet streams, the separation can be controlled and the sample can be separated in two distinct size fractions. Because earth gravity is used as separation force, Split Flow Thin Cell Fractionation (SPLITT) is limited to particles down to ca. 1µm, depending on their density.
     

    Split Flow Thin Cell (Splitt) Applications

    Split Flow Thin Cell Fractionation (SPLITT) has applications in the biomedical field (cell separations), in the environmental area (diatoms, sediments, algae, soil particles) and in the chemical sector (polymer and silica particles). The SEM picture shows Coccolithes, which can be fractionated by using Split Flow Thin Cell Fractionation (SPLITT) (courtesy provided by Dr. Hanno Kinkel, University of Kiel, Germany). In contrast to the other FFF techniques, Split Flow Thin Cell Fractionation (SPLITT) can separate particles in the size range of 1-100 µm on a continuous basis. That means a feed flow of non-separated sample can be continuously pumped into the Split Flow Thin Cell Fractionation (SPLITT). The system has two outlets (one for the smaller and one for the bigger sized particles) where the separated size fractions can be constantly collected. Split Flow Thin Cell Fractionation (SPLITT) is good for sample pre-treatment and clean-up as well as for production purposes.


Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment

RETURNS 
Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent.  We DO NOT ship internationally.  If you are using a freight forwarder then returns are VOID.  

SHIPPING                                                                                                               All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID.  
LIMITED WARRANTY                                                                 
Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use.  The entire risk as to the quality and performance of the equipment is with the Buyer.  Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair.  Buyer may inspect the equipment prior to purchase and placement of the order.  Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of the equipment for its application.  Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.  The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty.

INDEMNITY                                                                                                            
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller.  The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws.  Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California. 

 

 
 





 
 
FFFractionation PostNova Split Flow Thin Cell FISI-1000 Splitt (10411)

 

  • Manufacturer:  PostNova FFFractionation
  • Model: FISI-1000
  • Dimensions: 14.25 x 4 x 4.25" WDH
  • The following is taken from the manufacturer's website and we believe it pertains to this item.  It is included for reference only:
  • Split Flow Thin Cell (Splitt) Principle

     

    Microparticle Preparation

    Split Flow Thin Cell Fractionation (SPLITT) is a special preparative Field-Flow Fractionation technique, using earth gravity for separation of µm-sized particles on a continuous basis. Split Flow Thin Cell Fractionation (SPLITT) was invented and first published by Prof. Giddings in 1985. There are different ways of performing SPLITT; in the most common way, the sample containing liquid is pumped into the top inlet a’ at the beginning of the channel and a carrier liquid is at the same time pumped into the bottom inlet b’. By controlling the flow rate ratios of the two inlet streams and the flow rates of the two outlet streams, the separation can be controlled and the sample can be separated in two distinct size fractions. Because earth gravity is used as separation force, Split Flow Thin Cell Fractionation (SPLITT) is limited to particles down to ca. 1µm, depending on their density.
     

    Split Flow Thin Cell (Splitt) Applications

    Split Flow Thin Cell Fractionation (SPLITT) has applications in the biomedical field (cell separations), in the environmental area (diatoms, sediments, algae, soil particles) and in the chemical sector (polymer and silica particles). The SEM picture shows Coccolithes, which can be fractionated by using Split Flow Thin Cell Fractionation (SPLITT) (courtesy provided by Dr. Hanno Kinkel, University of Kiel, Germany). In contrast to the other FFF techniques, Split Flow Thin Cell Fractionation (SPLITT) can separate particles in the size range of 1-100 µm on a continuous basis. That means a feed flow of non-separated sample can be continuously pumped into the Split Flow Thin Cell Fractionation (SPLITT). The system has two outlets (one for the smaller and one for the bigger sized particles) where the separated size fractions can be constantly collected. Split Flow Thin Cell Fractionation (SPLITT) is good for sample pre-treatment and clean-up as well as for production purposes.


Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment

RETURNS 
Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent.  We DO NOT ship internationally.  If you are using a freight forwarder then returns are VOID.  

SHIPPING                                                                                                               All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID.  
LIMITED WARRANTY                                                                 
Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use.  The entire risk as to the quality and performance of the equipment is with the Buyer.  Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair.  Buyer may inspect the equipment prior to purchase and placement of the order.  Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of the equipment for its application.  Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.  The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty.

INDEMNITY                                                                                                            
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller.  The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws.  Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California. 

 

 
 

Specifications

ManufacturerFFFractionation
ModelFISI-1000
ConditionUsed
Stock Number10411