XILINX XCDaisy-FF668 Field Programmable Gate Array Lot of 2 (4480)

XILINX XCDaisy-FF668 Field Programmable Gate Array Lot of 2 (4480)

$650 (USD)

or Best Offer

Location:Goleta, CA

orCall (805)-6364334

Description

 
 
XILINX XCDaisy-FF668 Field Programmable Gate Array Lot of 2 (4480)w
New, old stock. Original seal has been broken.  See pictures for more detail.
  • Manufacturer: XILINX
  • Model #: XCDaisy-FF668
  • Model: FF668
  • Description:  668ball Ceramic Column flip-chip BGA, 27 x 27 mm, 1.0 mm ball pitch.  FPGAs are semiconducter devices that are base around a matrix of configurable logic blocks connected via programmable interconnects. FPGAs can be reprogrammed to desired application or functionality requirements after manufacturing. (Taken from manufacturer website). 
  • Originally sealed May 31st 2006
  • Mount within 72 hours
  • Moisture Level: 4
  • Peak body temp: 225ºC +0/-5C
  • Specifications: (Note* this data was taken from an online source and may not pertain to this particular model.)
  • Self-Max (nH): 6.2
  • Self-Min (nH): 0.8
  • C-Max (pF): 3.34
  • C-Min (pF): 0.84
  • R-Max (M  Ω):  1854 
  • R-Min M  Ω: 30
  • Recommended PCB Design Rules (Dimension in mm)
  • Component Land Pad Diameter (SMD): 0.53
  • Solder Land (L) Diameter: 0.45
  • Opening in Solder Mask (M) Diameter: 0.55
  • Solder (Ball) Land Pitch (e): 1.00
  • Line Width Between Via and Land (w): 0.13
  • Distance Between Via and Land (D): 0.70
  • Via Land (VL) Diameter: 0.61
  • Through Hole (VH) Diameter: 0.300


    • It appears this item is restricted for export by the Department of Commerce under the Bureau of Industry and Security (BIS) Export Administration Regulations, EAR (15 CFR, Parts 730-774). Items that are EAR restricted may or may not require a license depending on the end user and ultimate country of destination. The item type and specifications will determine which type of license is required. It is your responsibility to know the export classifications of your item and to comply with the regulatory licensing and documentation requirements. You must file a Shipper’s Export Declaration (SED) for all exports requiring a license. All export records must be retained for a minimum period of 5 years. Exporting without a license or valid license exemption when one is required or selling to a domestic person with the knowledge that the person intends to export without a license is illegal. Please consult the BIS website at www.bis.doc.gov for more directions. Also, please refer to eBay’s Military Items Policy for additional information.

      THIS ITEM MAY NOT BE EXPORTED.  END USER MUST BE IN THE U.S.A.


      Sold as is with 30 day Right of Return, only pictured items included
      Easy return/refund for any reason
      Anacapa Equipment

      RETURNS 
      Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent.  We DO NOT ship internationally.  If you are using a freight forwarder then returns are VOID.  
      SHIPPING                                                                                                               All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID.   
      LIMITED WARRANTY                                                                 
      Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use.  The entire risk as to the quality and performance of the equipment is with the Buyer.  Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair.  Buyer may inspect the equipment prior to purchase and placement of the order.  Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of the equipment for its application.  Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.  The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty. 
      INDEMNITY                                                                                                            

      Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller.  The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws.  Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.  
    		 
     





     
     
    XILINX XCDaisy-FF668 Field Programmable Gate Array Lot of 2 (4480)w
    New, old stock. Original seal has been broken.  See pictures for more detail.
    • Manufacturer: XILINX
    • Model #: XCDaisy-FF668
    • Model: FF668
    • Description:  668ball Ceramic Column flip-chip BGA, 27 x 27 mm, 1.0 mm ball pitch.  FPGAs are semiconducter devices that are base around a matrix of configurable logic blocks connected via programmable interconnects. FPGAs can be reprogrammed to desired application or functionality requirements after manufacturing. (Taken from manufacturer website). 
    • Originally sealed May 31st 2006
    • Mount within 72 hours
    • Moisture Level: 4
    • Peak body temp: 225ºC +0/-5C
    • Specifications: (Note* this data was taken from an online source and may not pertain to this particular model.)
    • Self-Max (nH): 6.2
    • Self-Min (nH): 0.8
    • C-Max (pF): 3.34
    • C-Min (pF): 0.84
    • R-Max (M  Ω):  1854 
    • R-Min M  Ω: 30
    • Recommended PCB Design Rules (Dimension in mm)
    • Component Land Pad Diameter (SMD): 0.53
    • Solder Land (L) Diameter: 0.45
    • Opening in Solder Mask (M) Diameter: 0.55
    • Solder (Ball) Land Pitch (e): 1.00
    • Line Width Between Via and Land (w): 0.13
    • Distance Between Via and Land (D): 0.70
    • Via Land (VL) Diameter: 0.61
    • Through Hole (VH) Diameter: 0.300


      • It appears this item is restricted for export by the Department of Commerce under the Bureau of Industry and Security (BIS) Export Administration Regulations, EAR (15 CFR, Parts 730-774). Items that are EAR restricted may or may not require a license depending on the end user and ultimate country of destination. The item type and specifications will determine which type of license is required. It is your responsibility to know the export classifications of your item and to comply with the regulatory licensing and documentation requirements. You must file a Shipper’s Export Declaration (SED) for all exports requiring a license. All export records must be retained for a minimum period of 5 years. Exporting without a license or valid license exemption when one is required or selling to a domestic person with the knowledge that the person intends to export without a license is illegal. Please consult the BIS website at www.bis.doc.gov for more directions. Also, please refer to eBay’s Military Items Policy for additional information.

        THIS ITEM MAY NOT BE EXPORTED.  END USER MUST BE IN THE U.S.A.


        Sold as is with 30 day Right of Return, only pictured items included
        Easy return/refund for any reason
        Anacapa Equipment

        RETURNS 
        Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent.  We DO NOT ship internationally.  If you are using a freight forwarder then returns are VOID.  
        SHIPPING                                                                                                               All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID.   
        LIMITED WARRANTY                                                                 
        Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use.  The entire risk as to the quality and performance of the equipment is with the Buyer.  Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair.  Buyer may inspect the equipment prior to purchase and placement of the order.  Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of the equipment for its application.  Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.  The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty. 
        INDEMNITY                                                                                                            

        Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller.  The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws.  Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.  
      		 
       
      Show All

      Specifications

      ManufacturerXilinx
      ModelXCDaisy-FF668
      ConditionNew
      Stock Number4480